Harness, Plug and other Useful Connectors

JohnnyTightlips

JohnnyTightlips

Motorhead
Here I am going to list useful wiring stuff people have found over the years. Please post stuff you also know about so that we can get a decent list going.

Throttle Body
Ford/Mazda 6 Way with keyway for DBW Throttle Body Connector Plug Kit Part # CONN-76080
Ford/Mazda 6 Way with keyway for DBW Throttle Body Connector Plug Pigtail Part # CONN-86080

EBCS
2 - Way Receptacle Connector Pigtail Part # CONN-85730

Coil Plugs
3 Way Plug connector pigtail for Nissan and Mazda coils Part # CONN-85775

NICECNC Ignition Coil Pack Repair Kit Connector for Nissan 350Z 03-09,370Z 09-16,Altima 02-16,Frontier 05-16,Maxima 90-16,Murano 03-16,NV1500/2500/3500 12-16,Pathfinde 01-16,Quest 04-16,Xterra 05-15

02 Sensor
4 Way Connector Extension for Japanese applications, Gray
4 Way NC Miata MX-5 Front Oxygen Sensor Extension

Maf Sensor
5 Way Plug Kit for Subaru & Toyota MAF
Ford Mass Air Flow MAF 24" Extension Harness Sensor Connector Harness 6-wire pin

Bosch Map Sensor
4-way sealed Plug Bosch BSK Connector Kit for Bosch MAP Sensor

VVT Variable Valve Timing and OCV Oil Control Valve
2 Way Solenoid Connector Kit for Mazda VCT VVT and Air Solenoids

Alternator
Sumitomo TS 3 Way Alternator Plug Pigtail, (Toyota # 90980-11349)

Parts to Build a Coil Wire Tuck

https://www.corsa-technic.com/
189024555_4104251636354865_7769119077949023409_n.png
189024555_4104251636354865_7769119077949023409_n.png
 
Last edited:
Found it. The LS3 MAF matches ours; Vince used this to tap in his SS Controller instead of splicing the factory wiring. I considered the same but then got lazy and just tapped my stock harness.

Template public:_media_site_embed_amazon not found. Try rebuilding or reinstalling the s9e/MediaSites add-on.
 
Tomas said:
Any idea where we can get the male plug on TB in order to make our own TB extension harness using the female plug in your first link?

By the way they also offer the TB plug as a pig tail for 3 moar dorrah.

Ford/Mazda 6 Way with keyway for DBW Throttle Body Connector Plug Pigtail
https://www.bmotorsports.com/shop/product_info.php/products_id/4478

AHH lookey here

Ford MAF Sensor Wiring Extension Harness Mass Air Flow 2005-2020 Mustang 12"

https://www.ebay.com/itm/Ford-MAF-Sensor-Wiring-Extension-Harness-Mass-Air-Flow-2005-2020-Mustang-12/223951545248?fits=Make:Ford&hash=item34248d63a0:g:sv4AAOSwi6Bec9s5
Click to expand...
Please try and add the Item info and model if you can so that many moons from now if the links don't work people still have some sort of reference. Thanks for the add.
 
Anyone know where I can find a replacement connector for the a/c compressor? All I have is the pin attached to the wire coming from the compressor.
 
SharksInSpace said:
Found it. The LS3 MAF matches ours; Vince used this to tap in his SS Controller instead of splicing the factory wiring. I considered the same but then got lazy and just tapped my stock harness.

Template public:_media_site_embed_amazon not found. Try rebuilding or reinstalling the s9e/MediaSites add-on.
Click to expand...

Does this work on a gen2? My MAF connector is giving me issues so I want to cut it out and solder in a new pigtail.
 
Sorry for reviving an old thread, at the same time it can be useful.
I'm trying to find the wiring harness pigtail that connects to the Spill Valve Control Solenoid Valve Connector (HPFP). The tabs that holds it in place broke off, I don't know how long is going to hold with zip ties. I looked online and I cannot find this part number to replace it, anyone knows?
 

Attachments

  • 154137977_297373931782014_6685366268011285973_n.jpg
    154137977_297373931782014_6685366268011285973_n.jpg
    487 KB · Views: 78
  • 155028026_116364740377652_4785428502459720447_n.jpg
    155028026_116364740377652_4785428502459720447_n.jpg
    390.8 KB · Views: 70
Raven said:
Sorry for reviving an old thread, at the same time it can be useful.
I'm trying to find the wiring harness pigtail that connects to the Spill Valve Control Solenoid Valve Connector (HPFP). The tabs that holds it in place broke off, I don't know how long is going to hold with zip ties. I looked online and I cannot find this part number to replace it, anyone knows?
Click to expand...
https://www.corsa-technic.com/item.php?item_id=986
This should be the one you need.
 
Raven said:
Sorry for reviving an old thread, at the same time it can be useful.
I'm trying to find the wiring harness pigtail that connects to the Spill Valve Control Solenoid Valve Connector (HPFP). The tabs that holds it in place broke off, I don't know how long is going to hold with zip ties. I looked online and I cannot find this part number to replace it, anyone knows?
Click to expand...

Mines broken too, although not as badly as yours. I put a touch of superglue on mine to ensure it stays on. If you replace it with the part that Johnny just listed, let me know if it works!

Edit: Screw it, it's only $8 shipped, I just ordered it and will see if it works lol.
 
Anyone know where to get the black 12 way connector for coilpack loom?
 

Attachments

  • 223E281A-C9F5-4F35-8F04-ED26FA3C9033.jpeg
    223E281A-C9F5-4F35-8F04-ED26FA3C9033.jpeg
    360.6 KB · Views: 40
_Mazdarati said:
Template public:_media_site_embed_amazon not found. Try rebuilding or reinstalling the s9e/MediaSites add-on.

This is the harness I used.
Click to expand...
Link dead you got a part number by chance?

SharksInSpace said:
Found it. The LS3 MAF matches ours; Vince used this to tap in his SS Controller instead of splicing the factory wiring. I considered the same but then got lazy and just tapped my stock harness.

Template public:_media_site_embed_amazon not found. Try rebuilding or reinstalling the s9e/MediaSites add-on.
Click to expand...
Link also dead you got a part number?
 
You must log in or register to reply here.
Back
Top